User`s guide

9 – Displaying Host, HBA Port, Device, and LUN Information
Displaying Device Information
9-8 IS0054602-00 A
Q
NOTE: For information about configuring targets, see section 7.3. For information
about changing the target configuration parameter values, see
section 7.3.3. Except for the parameters listed in section 7.3.3, they are
a subset of the firmware configuration parameters. See section 11.1 for
descriptions of the firmware configuration parameters.
Perform the following steps to view a target’s configuration firmware parameter
settings:
1. In the SANsurfer iSCSI HBA Manager main window HBA tree, select the HBA
port. Click the Target Information tab. The Target Information tabbed page
(HBA) displays (see figure 9-5).
Figure 9-5. Target Information Tabbed Page (HBA)
The HBA port identifying information displays:
❑ HBA. HBA instance number and HBA model
❑ State. The HBA port state. See section 8.1 for details about the HBA port
state and its correspondence with the HBA icons.
❑ Green background: good
❑ Yellow background: warning
❑ Blue background: unknown
❑ Red background: bad
❑ HBA iSCSI Name. HBA port iSCSI name. The QLogic manufacturing default
name or a name that you assign.