User`s guide

9 – Displaying Host, HBA Port, Device, and LUN Information
Displaying Device Information
IS0054602-00 A 9-7
Q
❑ Blue background: unknown
❑ Red background: bad
❑ HBA iSCSI Name. HBA port iSCSI name. The QLogic manufacturing default
name or a name that you assign.
❑ HBA Alias Name. HBA port iSCSI alias name. Symbolic name you assign
to the HBA port for identification purposes.
❑ IP Address. IP address of the HBA port
The target information displays:
❑ Product Vendor. Device manufacturer
❑ Product ID. Product ID of the device
❑ State. The target session connection state. See section 8.2 for details about
the target state and its correspondence with the device icons.
❑ Green background: good
❑ Blue background: unknown
❑ Red background: bad
❑ Target iSCSI Name. Device iSCSI name
❑ Product Revision. Device revision level
❑ Target Alias Name. Device iSCSI alias name (symbolic name)
❑ IP Address. IP address of the device
9.3.2
Viewing Target Configuration Firmware Parameter Settings
You can view the configuration firmware parameter settings for the target that you
specify. Note the following:
■ The target configuration parameter settings contain information on all targets
that have been saved or discovered (through SLP and the SendTargets
command). It does not include non-saved iSNS discovered targets nor newly
manually added targets that have not been saved.
■ The values that display for the target are negotiated values. The exceptions (for
which the default values display) include: there is no current session for the
target, the target’s session failed, or the value that displays is not a negotiated
value.