User`s guide

7 – Setting Up Connections
Configuring Targets
IS0054602-00 A 7-21
Q
6. If the enabled targets are configured to use the same initiator name and secret,
perform the following steps. Otherwise, skip to step 7.
NOTE: At the time of publication, the Hex radio button and ASCII radio
button are not supported.
a. In the Set Default Initiator Name and Secret section, select the Set Default
Initiator Name and Secret check box. The Initiator Name and Secret
section becomes inactive (you cannot specify different names and secrets
for each target).
b. Type the QLA4xxx HBA port (initiator) name and secret in the Name and
Secret fields in the Initiator section. The name can be a maximum of
256 ASCII characters; the secret can be a maximum of 100 ASCII
characters. The name and secret are automatically entered in the Initiator
Name and Secret section.
7. If the enabled targets are configured to use different initiator names and secrets,
perform the following steps:
a. In the Initiator Name and Secret section, double-click the Initiator Name
field in the row of the target you want to program. Type in the name, which
can be a maximum of 256 ASCII characters.
b. In the Initiator Name and Secret section, double-click the Initiator Secret
field in the row of the target you want to program. Type in the secret, which
can be a maximum of 100 ASCII characters.
8. Click OK.