User`s guide

6 – Getting Started
Refreshing the Configuration Immediately
IS0054602-00 A 6-19
Q
❑ If you do not want the configuration message to display when a host
configuration has changed, clear the Enable Prompt to Accept Host
Refresh check box. The configuration refreshes if it is set to update when
host status alarms occur (see section 6.7.2).
3. Click OK to save your changes. Click Cancel to exit the Preferences dialog
box without making any changes.
6.8
Refreshing the Configuration Immediately
The configuration that the SANsurfer iSCSI HBA Manager GUI displays refreshes
based on the polling intervals (see section 6.7.1) and whether the configuration is
set to update when host status alarms occur (see section 6.7.2).
If you want to refresh the configuration immediately (you changed the configuration,
for example), do one of the following:
NOTE: Selecting refresh forces the agent to poll the HBA immediately and update
the SANsurfer iSCSI HBA Manager configuration with the latest HBA
information.
■ Click the Refresh button on the toolbar.
■ On the SANsurfer iSCSI HBA Manager main window View menu, select
Refresh.
■ Press F5.