User`s guide

6 – Getting Started
Setting the Options for Retrieving Host Status Alarms and Refreshing
IS0054602-00 A 6-17
Q
6.7.2
Specifying Whether the Configuration Refreshes when Host and
Target Status Alarms Occur
You can specify whether the configuration that the SANsurfer iSCSI HBA Manager
GUI displays refreshes each time your system receives a host status alarm or target
status alarm.
Do the following:
1. From the View menu, select Preferences. The Preferences dialog box
displays (see figure 6-11).
Figure 6-11. Preferences Dialog Box (Update Behavior from Host Status Alarms)
2. In the Update Behavior from the Host Status Alarms section, do the following:
❑ If you want to refresh the configuration when the host receives a host status
alarm or a target status alarm, select the Enable All Updates from Host
Alarms check box and the Enable Updates from Target Status Alarms
check box.
❑ If you want to refresh the configuration when the host receives a host status
alarm but not a target status alarm, select only the Enable All Updates from
Host Alarms check box.
❑ if you do not want the configuration to refresh when host receives a host
status alarm nor a target status alarm, clear the Enable All Updates from
Host Alarms check box. The Enable Updates from Target Status Alarms
check box is unavailable.
3. Click OK to save your changes. Click Cancel to exit the Preferences dialog
box without making any changes.