User`s guide

6 – Getting Started
SANsurfer iSCSI HBA Manager Main Window
6-4 IS0054602-00 A
Q
The window consists of the following sections:
■ Application tabs
■ Title bar
■ Menu bar
■ Toolbar
■ HBA tree
■ Tabbed pages
■ Status line
An application tab displays only when the SANsurfer software for that application
has been installed on the system (see section 5.1.2). The tabs and their applications
are as follows. (To use the SANsurfer iSCSI HBA Manager, select the iSCSI HBA
tab.)
iSCSI HBA tab. SANsurfer iSCSI HBA Manager
FC HBA tab. SANsurfer FC HBA Manager
Switch tab. SANsurfer Switch Manager
The HBA tree displays the hosts with their connected HBAs, devices, and LUNs.
Note the following:
■ The title bar displays SANsurfer and the application that is active. For example,
if you selected the iSCSI HBA tab, SANsurfer: SANsurfer iSCSI HBA Manager
displays.
■ When you select an item in the HBA tree, the status line displays the same
information.
■ If the system is performing an operation, the information displays in the status
line. For example, if you changed the HBA port configuration and clicked Save
HBA, the status line would flash Current Operation: Saving Configuration until
the save was complete.
■ If an HBA is connected to a target, it has a button attached to the left. Click the
button to list all the devices connected to that HBA. Devices are listed by their
target iSCSI name or target iSCSI alias name. In addition, each target may have
LUNs connected to it. If a target is connected to a LUN, it has a button attached
to the left. Click the button to list all the LUNs connected to that target.
The HBA tree contains the following visual indicators:
Host icons and text. The HBA tree displays the following:
■ Host name: host name or IP address
Example:
hostname 10.3.13.90