User`s guide

11 – Updating the HBA
Updating the HBA Driver
11-14 IS0054602-00 A
Q
4. The Open dialog box displays (see figure 11-14). Select the driver that you
downloaded previously, then click Open.
Figure 11-14. Open Dialog Box (Driver)
5. The Security Check dialog box displays. In the Enter Password box, type the
password. Click OK.
6. The driver starts installing. The SANsurfer iSCSI HBA Manager main window
status line flashes Current Operation: Updating driver until the update is
complete.
NOTE: If you are installing a driver that is older than the current driver, do
the following:
■ Log on as administrator on the system where the driver is being
installed.
■ Minimize any open applications.
■ When the operating system pop-up window displays, confirm that you
want to install a driver that is older than the current driver.