User`s guide

IS0054602-00 A 11-1
Section 11
Updating the HBA
You can configure and restore an HBA’s firmware. You can also update an HBA
with new firmware, driver, ROM, and BIOS. This section discusses:
■ Configuring an HBA’s firmware values (see section 11.1)
■ Restoring an HBA’s factory default firmware values (see section 11.2)
■ Updating an HBA with new firmware (see section 11.3)
■ Updating an HBA with new ROM (see section 11.4)
■ Updating the HBA driver (see section 11.5)
■ Updating the BIOS from a file (see section 11.6)
11.1
Configuring an HBA’s Firmware Values
Perform the following steps to edit the HBA’s firmware configuration parameters:
1. In the SANsurfer iSCSI HBA Manager main window HBA tree, select the HBA
port. Click the HBA Options tab; click the Firmware tab. The HBA Options
tabbed page (Firmware tab) displays (see figure 11-1).
Figure 11-1. HBA Options Tabbed Page (Firmware Tab)