User`s guide

10 – Performing Diagnostics
Viewing the Connection Error Log
10-6 IS0054602-00 A
Q
❑ HBA Alias Name. HBA port iSCSI alias name. Symbolic name you assign
to the HBA port for identification purposes.
❑ IP Address. IP address of the HBA port
3. Click the Display Connection Errors button. The connection error log displays
(see figure 10-6).
Figure 10-6. Connection Error Log
For the HBA port that you selected, the connection error log displays the
following information. To view an entire entry, place the cursor on it. For detailed
information, see the ISP4010 Firmware Interface Specification (see
section 1.1).
❑ Delta Time. The number of seconds between the current timestamp and
the previous timestamp
❑ Timestamp. The time of the most current HBA reset
❑ Target ID. Device ID of the device as defined by the QLogic software
❑ Original State. The state of the HBA and target connection
❑ Entry Type. For the original state, the error or information category
❑ Error Type. For the entry type, the error or sense message and its hex value
❑ Detail Code. For the error type, the detailed error or sense information with
its hex value
❑ Number of Consecutive Errors. Number of times this detail code has
occurred consecutively
4. If you want to refresh the log information immediately, click Refresh.
5. To exit the log, do one of the following:
❑ Click Close.
❑ Click the close (x) button in the upper right-hand corner of the screen.