User`s guide

10 – Performing Diagnostics
Viewing the ARP Log
IS0054602-00 A 10-3
Q
10.2
Viewing the ARP Log
The address resolution protocol (ARP) cache keeps a record of host port
connections with other hardware (such as targets) on the network. The
IP address/MAC address pairs are dynamic entries that are removed after
10 minutes.
Perform the following steps to view the ARP log:
1. In the SANsurfer iSCSI HBA Manager main window HBA tree, select the HBA
port.
2. Click the Diagnostics tab; click the Logs tab. The Diagnostics tabbed page
(Logs tab) displays (see figure 10-3).
Figure 10-3. Diagnostics Tabbed Page (Log Tab)
The HBA port identifying information displays:
❑ HBA. HBA instance number and HBA model
❑ State. The HBA port state. See section 8.1 for details about the HBA port
state and its correspondence with the HBA icons.
❑ Green background: good
❑ Yellow background: warning
❑ Blue background: unknown
❑ Red background: bad