Installation guide

96
EMC Host Connectivity with QLogic Fibre Channel HBAs and CNAs in the Windows Environment
Installation and Configuration
The default password is config and if you leave the save password
for the current session box checked, you will not be required to
reenter this password later unless you close SANsurfer.
Figure 73 Security Check dialog box
7. SANsurfer may appear to be unresponsive while the adapter
flash memory is being updated. A message will appear when the
process is complete, as shown in Figure 74.
Figure 74 Flash Update dialog box
8. Click OK to complete the BIOS/firmware update procedure.
If you have other CNAs installed in your server, or second paths on
the same CNA, select them in the left pane of the SANsurfer utility
and follow this procedure for each CNA you need to update.