Installation guide

92
EMC Host Connectivity with QLogic Fibre Channel HBAs and CNAs in the Windows Environment
Installation and Configuration
Figure 69 Device Manager
Both of these hardware devices require a driver in order to function.
For the Fibre Channel adapter, the same procedure that is used to
install drivers on standard Fibre Channel adapters, described in
“Installing adapter driver and software utilities” on page 76, can be
used.
For the Intel 82598 10 Gigabit Ethernet Controller, visit
http://www.intel.com for drivers and information on driver
installation for this network adapter.
FCoE adapters also require BUIOS and firmware code for the Fibre
Channel adapter, as well as for the encapsulation ASIC known as the
Menlo chip. To update these BIOS and firmware versions, the QLogic
SANsurfer utility must be used. The minimum SANsurfer version for