Installation guide

86
EMC Host Connectivity with QLogic Fibre Channel HBAs and CNAs in the Windows Environment
Installation and Configuration
9. The HBA Configuration Update screen, shown in Figure 65, will
appear after the driver installation is complete. From here, you
may perform diagnostic procedures or other post-installation
tasks. If you are finished with your adapter update, click Quit.
Figure 64 HBA Configuration update dialog box
Post-installation procedures
Diagnostics 1. From the HBA Configuration Update screen, click Perform
Diagnostics (refer to Figure 64).The SANsurferHBA Install
Wizard window will appear, as shown in Figure 65 on page 87.