Installation guide

80
EMC Host Connectivity with QLogic Fibre Channel HBAs and CNAs in the Windows Environment
Installation and Configuration
Figure 58 SANsurfer driver location dialog box
This window presents three choices:
• Default Driver
This is the default selection. This selection will use the driver
located on the CD-ROM or the SANsurfer Install Wizard for
Windows file. Use this option if you downloaded the kit from
the QLogic website.
• From the QLogic website
The selection will automatically search the QLogic website for
the latest driver. An Internet connection is required. Use this
selection if you are upgrading your adapter drivers to a newer
version.
•Browse
Use this option if you previously downloaded the driver file
and stored it on your hard drive.