Installation guide

72
EMC Host Connectivity with QLogic Fibre Channel HBAs and CNAs in the Windows Environment
Installation and Configuration
After the adapter driver is loaded, the Install Windows screen
displays (Figure 50).
Figure 50 Install Windows screen
13. Click Next to begin the Windows installation.
Setup will copy the Windows system files to the partition and
start rebooting the server.
14. Do not press a key if your system prompts you to "press any key
to boot from DVD-ROM." Instead, allow the system to boot from
the array (if external) or the local disk (if internal). After booting,
the system continues installation, displays the Windows banner,
and begins auto detection of mass-storage devices and adapters.
15. Follow the on-screen instructions to complete the installation.