Installation guide

60
EMC Host Connectivity with QLogic Fibre Channel HBAs and CNAs in the Windows Environment
Installation and Configuration
Figure 37 Windows setup screen
6. Press Enter to begin the setup procedure.
Note: If you are installing Windows on a newly created LUN, you may
receive a message that your boot disk is new or erased. Press C to
continue.
A Windows Licensing Agreement appears.
7. Read the license agreement. (Press Pg Dn as necessary to scroll
through the text.) To accept the agreement, press F8.
Setup inspects your computer's hardware configuration. The
setup screen displays disk partition information (if your system
already contains partitions), or lets you create a new partition.
(Refer to Figure 38 on page 61.)