Installation guide

EMC Host Connectivity with QLogic Fibre Channel HBAs and CNAs in the Windows Environment

Installation and Configuration

Table 3 lists the pre-configured parameters for 4 Gb/s.

Table 3 Pre-configured parameters for 4 Gb/s

Parameter EMC-approved setting for 4 Gb/s

Data Rate Auto

Execution Throttle 256

Connection options Loop preferred, otherwise

point-to-point

Loop Reset Delay 5

Enable LIP Full Login Yes

Enable Target Reset Yes

Port Down Retry Count 45

Link Down Timeout 45

LUNs Per Target 256

Enable Hard Loop No

Hard Loop ID 0

Operation Mode 0

Interrupt Delay Timer 0

Frame Size 2048

Enable BIOS No

Enable FC Tape Yes

Enable Receive OoOFrame Yes