Installation guide

36
EMC Host Connectivity with QLogic Fibre Channel HBAs and CNAs in the Windows Environment
Installation and Configuration
Figure 16 Fast!UTIL Options window
14. To exit the Fast!UTIL configuration utility, select Exit Fast!UTIL
and press Enter.
The system will now reboot.
During the subsequent reboot, the QLogic BIOS banner screen should
show the array and LUN specified as a boot-capable LUN (as shown
in Figure 17).
Figure 17 Typical QLogic BIOS banner screen
At this point, the OS installation can begin using this LUN as the boot
volume.