Installation guide

18
EMC Host Connectivity with QLogic Fibre Channel HBAs and CNAs in the Windows Environment
Installation and Configuration
Installing the adapter
Follow the instructions included with your adapter. The adapter
installs into a single slot.
To connect the cable to the adapter:
1. (Optical cable only) Remove the protective covers on each
fiber-optic cable.
2. Plug one end of the cable into the connector on the adapter as
shown in the appropriate figure in this step. (The hardware might
be rotated 90 degrees clockwise from the orientation shown.)
• Fibre Channel adapter connectivity options include copper
cable with DB9 connector, SC optical, and LC optical cable, as
shown next.
– Copper cable with DB9 connector:
– SC optical cable:
– LC optical cable:
2
1
3
2
1
3