Installation guide

174
EMC Host Connectivity with QLogic Fibre Channel HBAs and CNAs in the Windows Environment
Miscellaneous Planning and Procedures
8. Run symmask replace to substitute a new WWN for all
occurrences in the database of the old WWN.
9. Run
symmask discover to establish the new names in the history
table, or run
symmask rename to assign a WWN to the new
adapter in both the database and the history table.
10. Run
symmask refresh to update the director profile tables (in
cache) from the database.
11. Scan for hardware changes from the Windows device manager.
12. Execute the following commands from a command window:
powermt restore
powermt display
At this point, two adapters should be present in the display and
the FC adapters should be duplexed in the ftSMC. It may be
necessary to repeat steps 9 and 10.