Installation guide

170
EMC Host Connectivity with QLogic Fibre Channel HBAs and CNAs in the Windows Environment
Miscellaneous Planning and Procedures
Figure 123 Utilities tabbed page
The identifying information displays:
• Host: Name of the host connected to the adapter.
• Adapter: Adapter number and type.
• Node Name: World Wide adapter node name.
• Port Name: World Wide adapter port name.
• Port ID: Port ID of the adapter.
3. Click the Update Entire Image button to update the Boot BIOS.
Since EMC kits are provided as universal kits, the entire flash
image must be used.
4. Select the file that contains the flash BIOS. You can obtain this file
from the QLogic website. Refer to “Downloading latest QLogic
drivers/firmware/BIOS files” on page 16. The file typically ends