Installation guide

148
EMC Host Connectivity with QLogic Fibre Channel HBAs and CNAs in the Windows Environment
Miscellaneous Planning and Procedures
2. On the host, go into the QLogic BIOS and change the iqn name to
iqn.1991-05.com.microsoft:servername. (If networking is
configured during installation, set the iqn name to
iqn.1991-05.com.microsoft :servername.domainname).
This can be accomplished by the following procedure:
a. On POST when the QLogic adapter displays, press < Ctrl Q>
for Fast!Util.