Installation guide

134
EMC Host Connectivity with QLogic Fibre Channel HBAs and CNAs in the Windows Environment
Installation and Configuration
4. Perform a device rescan on your host, and verify the additional
device paths are present.
Option 2: With brief disruption of host connectivity (simpler procedure
using Unisphere/Navisphere GUI):
1. Shut down the host.
2. Remove the host from the storage group.
3. Apply the change.
4. Add the host back into the storage group.
5. Restart the host.
6. Check the array connectivity status to ensure all connections you
require are active.