Installation guide

Verifying connectivity to the storage array
129
Installation and Configuration
Figure 110 Connect to the host
6. In the Enter Hostname or IP Address field, perform one of the
following:
• Select localhost to connect to the machine on which you are
using the SANsurfer FC HBA Manager GUI.
or
• Type or select a remote machine. You can use the hostname or
the machine's IP address.
7. Do one of the following:
• Click Connect to initiate the connection. If successful, the host
and its HBAs display in the HBA tree. If you entered a new
remote host and the connection was successful, its name is
also added to the Enter hostname or IP address box
drop-down list.
• Click Cancel to abort the connection process and return to the
SANsurfer FC HBA Manager main window, as shown in
Figure 111 on page 130.
• Click Clear to delete all machines on the list except local host.
(The local machine cannot be deleted.)