Installation guide

122
EMC Host Connectivity with QLogic Fibre Channel HBAs and CNAs in the Windows Environment
Installation and Configuration
7. The Initiator IP Settings displays, as shown in Figure 104
Figure 104 Initiator IP Settings
8. Use the Arrow keys and Enter key to enable IPv4 and set IP
address.
9. Press the Esc key to return to the previous Host Adapter Settings
screen as shown Figure 103 on page 121.
10. Use the Arrow keys and Enter key to type in the Initiator iSCSI
Name, Initiator CHAP Name, and Initiator CHAP Secret, if
applicable.
11. Press the Esc key to return to previous Configurations Settings
screen as shown in Figure 102 on page 120.
12. Select iSCSI Boot Settings and press Enter.