Installation guide

118
EMC Host Connectivity with QLogic Fibre Channel HBAs and CNAs in the Windows Environment
Installation and Configuration
1. When the QLogic Fast!UTIL 10 GbE iSCSI BIOS banner displays
during power-on self-test (POST), as shown in Figure 99, press
Ctrl Q to enter the QLogic Fast!UTIL 10 GbE iSCSI BIOS
Configuration utility.
Figure 99 QLogic Fast!UTIL 10 GbE iSCSI BIOS banner
2. The utility opens to the main QLogic Fast!UTIL iSCSI Select
Utility page, as shown in Figure 100.
Figure 100 QLogic Fast!UTIL iSCSI Select Utility page