Installation guide

FCoE converged network adapter (CNA) procedures
117
Installation and Configuration
13. When the Finish window displays, click Finish to complete the
flash update, as shown in Figure 98.
Figure 98 Finish
Configuring QLogic FAST!UTIL 10 GbE iSCSI BIOS/boot LUN settings for QLE8242
iSCSI adapters
This section describes the steps required to configure a QLogic
Fast!UTIL 10 GbE iSCSI boot BIOS to allow an array-attached LUN to
be used as a boot disk for the server.
To configure QLogic Fast!UTIL 10 GbE iSCSI adapter boot BIOS,
complete the following steps.