Installation guide

FCoE converged network adapter (CNA) procedures
101
Installation and Configuration
Installing or upgrading the driver and utilities on a QLogic QLE8242 CNA
To install or upgrade the driver and utilities on a QLogic QLE8242
CNA, complete the following steps.
1. Download the driver kit installer from the QLogic website in the
EMC section and install it on your system. If you have
downloaded the kit to your hard drive, locate then double-click
the file.
The QConverged Console Driver Install Wizard displays, as
shown in Figure 80.
Figure 80 QConverged Console Driver Install Wizard
2. Click Next to start the installation.