Installation guide

100
EMC Host Connectivity with QLogic Fibre Channel HBAs and CNAs in the Windows Environment
Installation and Configuration
The default password is config and if you leave the Save
password for the current session box checked, you will not be
required to reenter this password later unless you close
SANsurfer.
Figure 78 Security Check dialog box
9. SANsurfer may appear to be unresponsive while the adapter
flash memory is being updated. A message will appear when the
process is complete, as shown in Figure 79.
10. Click OK to complete the BIOS/firmware update procedure.
Figure 79 Flash update dialog box
If you have other CNAs installed in your server, select them in the left
pane of the utility and follow this procedure for each CNA you need
to update.
Note: EMC recommends rebooting your server after completing firmware
updates to your adapter.