Installation guide

98
EMC Host Connectivity with QLogic Fibre Channel HBAs and CNAs in the Windows Environment
Installation and Configuration
4. To update the Menlo firmware of the adapter, click the Utilities
tab and then click Update Firmware, as shown in Figure 76.
Figure 76 Utilities tab
5. A new window appears, as shown in Figure 77 on page 99.
6. In this window, browse to the location of the firmware file that
you wish to load. This file could be included on EMC-Approved
installation media, or can be downloaded from the QLogic
website as described in “Downloading latest QLogic
drivers/firmware/BIOS files” on page 16.