User`s guide

SANsurfer FC HBA Manager Readme Page 6 of 13
NOTES:
♦ While uninstalling SANsurfer FC HBA Manager from a NetWare server, the server's
prompt displays the following message:
Cannot stat sys:etc/rpcnet.cfg
You can ignore this message because it does not affect NetWare server operation.
♦ The uninstall process does not remove specific files and directories. You must
manually delete these files.
6 Additional Notes
The following sections provide additional information according to operating system:
♦ 6.1 General (Applies to All Operating Systems)
♦ 6.2 Windows
♦ 6.3 Linux
♦ 6.4 Solaris
♦ 6.5 NetWare
♦ 6.6 Mac OS X
♦ 6.7 VMware ESX
6.1 General (Applies to All Operating Systems)
6.1.1 Manually Mapping the Host Name to IP
SANsurfer FC HBA Manager does not allow connecting to the same host more than once;
doing so causes issues with policies and wastes system resources. Consequently, all host IP
addresses must resolve to a host name to allow the connection to complete.
If DNS is not used, you must edit the local host file on the system where you are running
SANsurfer FC HBA Manager to manually map the host name to the static IP address.
The following shows the name and location of the host file for each OS:
♦ Windows:
<install drive>:windows\system32\drivers\etc\hosts
♦ Linux:
/etc/hosts
♦ Mac OS X:
/etc/hosts
♦ Solaris:
/etc/hosts