User`s guide
SANsurfer FC HBA Manager Readme Page 5 of 13
window. The installer appears to hang; however, it is waiting for an action to be taken on
the hidden window.
To install SANsurfer FC HBA Manager:
1. Go to the QLogic Driver Downloads/Documentation Web page located here:
http://driverdownloads.qlogic.com/
2. Click QLogic Products.
3. On the QLogic Products: Adapters selection box, follow these steps:
a. In the first column, click the adapter type; Fibre Channel Adapters or
Converged Network Adapters.
b. In the second column, click the adapter model number.
c. In the third column, click your specific operating system.
d. Click the Go button.
4. On the downloads page for the specified adapter and OS, under Management Tools,
click the SANsurfer FC HBA Manager installation file.
5. Read the End User Software License Agreement, and then click I Agree to continue
with the download.
6. Save the file to your local machine.
7. Run the installer and follow the on-screen instructions to complete the installation.
NOTE: The default SANsurfer FC HBA Manager operation password is config. To ensure that
security is not compromised, change this password after installing the utility.
5.2 Starting SANsurfer FC HBA Manager
To start and run SANsurfer FC HBA Manager, select the product, and then follow the
procedures for your specific operating system provided in the SANsurfer FC HBA Manager
User's Guide, "Starting SANsurfer FC HBA Manager" section.
For Novell NetWare agent installation, when the SANsurfer installation completes, you must
start the SANsurfer FC HBA Manager agent by doing one of the following:
♦ Reboot the NetWare server where the agent was installed.
♦ Issue the following commands on the NetWare server console where the agent
resides:
RPCSTART
LOAD QLREMOTE.NLM
NOTE: This instruction assumes that you have already loaded the QLogic Novell NetWare
HAM driver.
5.3 Removing SANsurfer FC HBA Manager
Be sure to exit the SANsurfer FC HBA Manager installer before you uninstall SANsurfer FC
HBA Manager.
To remove SANsurfer FC HBA Manager, follow the procedures for your specific operating
system provided in the SANsurfer FC HBA Manager User's Guide, "Uninstalling the
SANsurfer" section.