User`s guide

7 – Setting Up Connections

Configuring HBA Ports Using the General Configuration Wizard

7-14 FS0054603-00 C

Configure the following connection option and data rate FC connection

parameters.

a. In the Connection Options box, select the type of connection (loop or

point-to-point) or connection preference. See section 11.1.1 for details.

NOTE: Configuring the connection option is available only on QLA2xxx

HBAs. This option is not available on QLA200 HBAs, and appears

dimmed on the HBA Port Connection Settings dialog box.

b. In the Data Rate box, select the HBA port data rate. See section 11.1.1 for

details.

NOTE: Configuring the data rate is available only on QLA23xx HBAs. This

option is not available on QLA22xx HBAs nor QLA200 HBAs, and

appears dimmed on the HBA Port Connection Settings dialog

box.

c. Do one of the following:

❑ Click Back to return to the previous dialog box.

❑ Click Next to proceed.

❑ Click Cancel to exit the General Configuration Wizard without making

any changes.

❑ Click Help to display context-sensitive help.