User`s guide

5 – Installing SANsurfer FC HBA Manager
Initial Installation
FS0054603-00 C 5-9
Q
Do one of the following:
NOTE: For NetWare, select the drive mapped to the NetWare server (always
select a location other than the default).
❑ To select the destination location displayed in the dialog box, click Next
(recommended).
The default location for a Windows 2000/Windows Server 2003 system is:
C:\Program Files\QLogic Corporation\SANsurfer
The default location for a Red Hat/SuSE Linux and Solaris SPARC system is:
/opt/QLogic_Corporation/SANsurfer
❑ To select a different location:
a. Click Choose.
b. Select the desired location.
c. The Choose Install Folder dialog box redisplays. Click Next.
❑ If you selected a different location and want to reselect the default location:
a. Click Restore Default Folder.
b. Click Next.
6. If you are installing the SANsurfer FC HBA Manager GUI on a
Windows 2000/Windows Server 2003 system, the Select Shortcut Profile
dialog box displays (see figure 5-6).
Figure 5-6. Select Shortcut Profile Dialog Box (Windows 2000/Windows Server 2003)