User`s guide

11 – Updating the HBA
Updating the FCode
11-18 FS0054603-00 C
Q
11.4
Updating the FCode
NOTE: The SANsurfer FC HBA Manager update FCode feature is available only
on Solaris SPARC systems. It is not available on Windows 2000/Windows
Server 2003, NetWare, nor Red Hat/SuSE Linux (the Update FCode
button does not display on the Utilities tabbed page).
Perform the following steps to update the FCode:
1. In the SANsurfer FC HBA Manager main window Manager main menu HBA
tree, select the HBA port.
If you want to configure multiple HBA ports with the same settings, hold the
CTRL key while selecting multiple HBA ports. The HBAs must be in the same
series (QLA23xx HBAs, QLA22xx HBAs, or QLA200 HBAs).
NOTE: Only the Settings (HBA Port Settings and Advanced HBA Port
Settings) and Utilities tabbed pages can be configured for multiple
HBA ports; therefore, the remaining tabbed pages do not display
when multiple HBA ports are selected.
2. Click the Utilities tab. The Utilities tabbed page displays (see figure 11-10).
Figure 11-10. Utilities Tabbed Page (Solaris SPARC)