User`s guide

11 – Updating the HBA
Updating the HBA Port Settings, Advanced HBA Port Settings, and Boot Device
11-2 FS0054603-00 C
Q
The Settings tabbed page displays parameters that are saved in NVRAM. These
settings configure Fibre Channel devices and the QLA200/QLA2xxx HBA to which
they are attached (see figure 11-1).
Figure 11-1. Settings Tabbed Page (HBA Port Settings) Sample
The identifying information displays:
■ Hostname. Name of the host connected to the HBA
■ HBA Model. The QLA200/QLA2xxx HBA
■ Port. HBA port number
■ Node Name. World wide HBA node name
■ Port Name. World wide HBA port name
■ Port ID. Port ID of the HBA port
The bottom section displays one of three panels:
■ HBA Port Settings
■ Advanced HBA Port Settings
■ Boot Device Selection