User`s guide

8 – Monitoring the Connections
Viewing and Managing the Alarm Log
FS0054603-00 C 8-7
Q
This section discusses:
■ Viewing the alarm log (see section 8.2.1)
■ Clearing the alarm log (see section 8.2.2)
■ Exporting the alarm log (see section 8.2.3)
■ Printing the alarm log (see section 8.2.4)
■ Viewing an alarm log received by email (see section 8.2.5)
NOTE: See section 6.10 for information about setting the alarm log options.
8.2.1
Viewing the Alarm Log
Perform the following steps from the SANsurfer FC HBA Manager main window to
view the Alarm Log dialog box:
1. To view the alarms for one host, do one of the following:
❑ Select the host in the HBA tree. From the View menu, select Alarm Log.
❑ Right-click the host in the HBA tree. From the pop-up menu, select Alarm
Log.
❑ Select the host in the HBA tree. Click Alarms on the toolbar.
❑ Select the host in the HBA tree. Press CTRL+SHIFT+A.
To view the alarms on one HBA, do one of the following:
❑ Select the HBA in the HBA tree. From the View menu, select Alarm Log.
❑ Right-click the HBA in the HBA tree. From the pop-up menu, select Alarm
Log.
❑ Select the HBA in the HBA tree. Press CTRL+SHIFT+A.
To view the alarms on one HBA port, do one of the following:
❑ Select the HBA port (or a device or LUN connected to the HBA port) in the
HBA tree. From the View menu, select Alarm Log.
❑ Right-click the HBA port (or a device or LUN connected to the HBA port) in
the HBA tree. From the pop-up menu, select Alarm Log.
❑ Select the HBA port (or a device or LUN connected to the HBA port) in the
HBA tree. Press CTRL+SHIFT+A.