User`s guide

7 – Setting Up Connections
Printing a Host Configuration
7-50 FS0054603-00 C
Q
7.12
Printing a Host Configuration
Perform the following steps to print a host configuration:
1. From the SANsurfer FC HBA Manager main window, do the following:
a. In the HBA tree, select the host (or HBA, HBA port, device, or LUN connected
to the host).
b. Do one of the following:
❑ Click the Configure button on the toolbar.
❑ From the Host menu, click Configure.
❑ Right-click the host, HBA, HBA port, device, or LUN in the HBA tree. From
the pop-up menu, select Configure.
❑ Press CTRL+C.
The Fibre Channel Port Configuration dialog box displays (see figure 7-15).
2. From the File menu, select Print.
3. Select the printer and print the configuration.
7.13
Comparing Host Configurations
The compare host features allows you to visually see the changes happening to
your SAN: devices being added, devices being removed, BIOS updates, and HBA
updates.