User`s guide

7 – Setting Up Connections

Deleting Persistent Configuration Data

7-44 FS0054603-00 C

2. Do one of the following:

❑ Delete one or more entries as follows:

a. Select the HBA port entries that you want to delete.

b. Click Delete to remove the entries.

c. The Security Check dialog box displays. In the Enter Password box,

type the password. Click OK.

NOTE: Changes made to the persistent configuration are final. If you do

not want the changes, reconfigure the host (see section 7.2).

❑ Click Cancel to not delete an entry.

7.9.2

Deleting Device Persistent Configuration Data

NOTE: This option is not available on Solaris SPARC.

Perform the following steps to delete the persistent configuration data for a device

and its LUNs:

1. Do one of the following:

❑ From the SANsurfer FC HBA Manager main window HBA tree, right-click

the device (or LUN connected to the device). From the pop-up menu, select

Device Persistent Configuration Data.

❑ From the Fibre Channel Port Configuration dialog box Device menu,

select Persistent Configuration Data.

The Fibre Persistent Configuration Editor displays the devices (see

figure 7-22).

Figure 7-22. Fibre Persistent Configuration Editor for Devices

For each device connected to the HBA port, the Fibre Persistent

Configuration Editor displays the device number and device world wide node

name.