Installation guide

14
Configure Storage
Depending on your storage, you may connect directly to the FCoE switch through FCoE with native FCoE
storage, or through other methods (Fibre Channel, iSCSI, NFS, CIFS). Consult your storage array documentation
for instructions on how to enable your array and assign disk storage LUNs. The storage installed for this report
was two 4 Gb Fibre Channel storage systems (a Sun ZFS Storage Appliance and a Sun Storage 6180 Array).
Verify Equipment Connectivity
When the LUNs have been created and all zoning is complete, use the management interface to add the WWNs of
the Converged Network Adapter Fibre Channel initiators to your storage so that the servers can discover the
LUNs.
1. The screen captures in Figure 3 show the LUN assignments for the ZFS Storage Appliance and the Oracle Sun
Storage 6180 Array.