User`s guide

● The QLC driver does not support selective LUN configuration.
7. Known Issues and Workarounds
This section describes the known issues and workarounds (if any) for SANsurfer FC HBA CLI according
to operating system.
7.1 Windows
7.1.1 Unsigned Windows Driver Update
Issue: When performing a driver update on unsigned Windows drivers, the OS displays a confirmation
dialog box. The dialog box appears in front of SANsurfer (focus).
Workaround: None
7.1.2 Driver Parameters Revert to Their Default Values
Issue: When updating the Windows driver using SANsurfer FC HBA CLI, the driver parameters revert to
their default values:
Present targets that are persistently bound plus any new target(s) found
Workaround: Bind by world wide port name (WWPN).
7.1.3 Windows Server 2008 and Vista installation Limits
Issue: SANsurfer FC HBA CLI installation fails on Windows Server 2008 and Vista if you are not logged
in as an administrator.
Workaround: Right-click the installation setup file, and from the shortcut menu, click Run as
Administrator.
7.1.4 HBA Parameters/Templates and Flash Updates on 8Gb Adapters with Windows Server
2008 Inbox Driver Version 9.1.4.5 or 9.1.4.6
Issue: SANsurfer FC HBA CLI does not support adapter parameters and Flash updates on 8Gb adapters
if running the Windows server 2008 inbox driver version 9.1.4.5 or 9.1.4.6
Workaround: You must update the host to the latest QLogic driver.
7.1.5 Features Not Available When Running Windows Driver with NPIV Enabled
Issue: When running the driver with NPIV enabled on Windows, the following features are not available
with a virtual port:
● HBA parameters settings
● HBA parameters restore default
● Flash update from file
● Flash save to file
● HBA parameters update from file
● HBA parameters save to file
● HBA parameters update from templates
● Target link speed
● Boot device settings
● Driver settings
SANsurfer FC/CNA HBA Command Line Interface (CLI) Readme
6 of 10