User`s guide

3 – Managing Fabrics
Zoning a Fabric
3-22 59022-05 A

3.5.7.2
Adding Zone Members
Adding a zone member to a zone will affect every zone set in which that zone is a
member. To add member ports/devices to a zone, do one of the following:
■ Select a port by port number, Fibre Channel address, or worldwide name in
the Port/Device tree, and drag it into the zone. To select and drag multiple
ports/devices, press and hold the Control key while dragging.
■ Select one or more ports by port number, Fibre Channel address, or
worldwide name in the Port/Device tree. Right-click the zone and select Add
Zone Members from the popup menu.
Choose the Apply button to save changes to the zoning database.
3.5.7.3
Renaming a Zone or a Zone Set
To rename a zone, do the following:
1. In the Zone Sets tree of the Edit Zoning window, click the zone/zone set to
be renamed.
2. Open the Edit menu and select Rename.
3. In the Rename Zone/Rename Zone Set window, enter a new name for the
zone/zone set.
4. Choose the OK button.
3.5.7.4
Removing a Zone Member
Removing a zone member will affect every zone and zone set in which that zone
is a member. To remove a member from a zone:
1. In the Edit Zoning window, select the zone member to be removed.
2. Open the Edit menu and select Remove.
3. Choose the OK button to save changes and close the Edit Zoning window.
Note: Domain ID conflicts can result in automatic reassignment of switch
domain IDs. These reassignments are not reflected in zones that use
domain ID/port number pair to define their membership. Be sure to
reconfigure zones that are affected by a domain ID change.