User`s guide

2 – Using SANbox Manager
Using the Topology Display
59022-05 A 2-19

■ To open the fabric popup menu when viewing the topology display, right-click
the graphic window background. The fabric popup menu presents selections
to refresh the fabric, select all switches, select all links, or layout topology.
■ To open the switch popup menu when viewing the topology display,
right-click the switch icon in the graphic window. The switch popup menu
presents selections to refresh the switch, delete the switch from the display,
open the Switch Properties window, or open the Network Properties window.
■ To open the link popup menu, right-click the link. The Link popup menu
presents a selection to delete the link from the display.
■ To open a faceplate display popup menu, right-click the faceplate graphic in
the graphic window. The faceplate popup menu presents selections that do
the following:
❑ Refresh the switch
❑ Select all ports
❑ Manage switch properties
❑ Manage network properties
❑ Extend credits
❑ Manage port properties
❑ Run the port loopback tests.
2.10.3
Topology Data Windows
The topology display provides the following data windows corresponding to the
data window tabs:
■ Name Server – displays all devices logged with the name server and their
addresses within the current fabric configuration. Refer to ”Name Server
Data Window” on page 4-3 for more information.
■ Active Zoneset – displays the active zone set for the fabric including zones
and their member ports. Refer to ”Active Zone Set Data Window” on
page 3-9 for more information about this data window. Refer to ”Zoning a
Fabric” on page 3-10 for information about zone sets and zones.
■ Switch – displays current network and switch configuration data for the
selected switches. Refer to ”Switch Data Window” on page 4-4 for more
information.
■ Link – displays information about inter-switch links. Refer to ”Link Data
Window” on page 4-6 for more information.