User`s guide

2 – Using SANbox Manager
Changing Default File Password
2-10 59022-05 A

2.5
Changing Default File Password
To change the password for the default fabric view file, do the following:
1. Open the File menu and select Change Default File Password to open the
Set New Password window as shown in Figure 2-5.
Figure 2-5 Set New Password Window
2. Enter the new password in the Default File Password field.
3. Re-enter the same password in the Re-enter Password to Confirm field.
4. Choose the OK button to save the changes.
2.6
Setting Preferences
Using the Preferences settings, you can:
■ Change the location of the working directory in which to save files
■ Change the location of the browser used to view the online help.
■ Choose the fabric discovery interval. The fabric discovery interval is how
often the SANbox Manager application receives information from the fabric.
Choose 30, 45, or 60 seconds.
■ Enable or disable the default view file auto save and load feature. Refer to
”Starting SANbox Manager” on page 2-6 for more information on the default
fabric view file.
■ Choose the default port view when opening the faceplate display. Refer to
”Monitoring Port Status” on page 5-2 for more information on port views.