User`s guide

59022-05 A C-1
Appendix C
Messages
This appendix lists the SANbox Manager messages by task, dialog, or display. To
find a message and what to do about it, consider what task you are performing,
and refer to the corresponding subsection.
■ ”Fabrics File—Open, Save” on page C-1
■ ”Add a Fabric” on page C-2
■ ”Network Properties Dialog” on page C-3
■ ”Switch Properties Dialog” on page C-4
■ ”Port Properties Dialog” on page C-8
■ ”Faceplate Display” on page C-10
■ ”Load Firmware Dialog” on page C-13
■ ”Firmware Fallback Dialog” on page C-13
■ ”Port Loopback Test Dialog” on page C-15
■ ”Extended Credits Dialog” on page C-17
■ ”Zoning Dialog” on page C-17
■ ”Restore Configuration Dialog” on page C-20
■ ”Save Fabric View” on page C-20
■ ”Trap Configuration Dialog” on page C-21
C.1
Fabrics File—Open, Save
Table C-1. Fabrics File – Open, Save Messages
Message User Action
Failed opening fabrics list file filename. Verify that the specified file exists on a file
system that is reachable, and that the user
has permissions to read the file.
Failed saving fabrics list file filename. Verify that the specified file system is
reachable, and that the user has
permissions to write to the file system, to
the directory, and to the file.