Manualshelf

User`s guide

ManualsBrandsQlogic ManualsComputer equipmentSANbox2-64
27282930313233343536
3 – Alarm Messages
Alarm Messages
59060-00 01 PRELIMINARY 3-21
0
[A3014.0001] [SM] [Blade in slot <slot> set Down due to failure of all AuxPorts]
Meaning: The I/O blade in the named slot has isolated because all auxiliary
ports to the cross-connect blades have failed.
Action: Contact customer support.
[A3014.0002] [SM] [Blade in slot <slot> set Online due to recovery of at least one AuxPort]
Meaning: The I/O blade in the named slot has recovered at least one
auxiliary port to a cross-connect blade and is no longer isolated.
Action: None
[A3015.0001] [SM] [I/O blade in slot <slot> has been inserted into chassis]
Meaning: An I/O blade has been installed in the named slot.
Action: None
[A3016.0001] [SM] [I/O blade in slot <slot> has been removed from chassis]
Meaning: The I/O blade has been removed from the named slot.
Action: None
[A4000.0001] [SM Port: <port no.>] [Login attempts <attempts> hit rising trigger <trigger>
in <window> second window on port <port no.> - ALARM SET]
Meaning: The number of device logins on the named port has exceeded the
specified rising trigger.
Action: Review the port alarm threshold configuration and make any
necessary corrections. Inspect the port, transceiver, cable, and
device for proper operation.
[A4001.0001] [SM Port: <port no.>] [Logout attempts of <attempts> hit rising trigger
<trigger> in <window> second window on port <port no.> - ALARM SET]
Meaning: The number of device logouts on the named port has exceeded the
specified rising trigger.
Action: Review the port alarm threshold configuration and make any
necessary corrections. Inspect the port, transceiver, cable, and
device for proper operation.
[A4002.0001] [SM Port: <port no.>] [CRC errors of <errors> hit rising trigger <trigger> in
<window> second window on port <port no.> - ALARM SET]
Meaning: The number of CRC errors on the named port has exceeded the
specified rising trigger.
Action: Review the port alarm threshold configuration and make any
necessary corrections. Inspect the port, transceiver, cable, and
device for proper operation.