User`s guide

3 – Alarm Messages
Alarm Messages
3-20 PRELIMINARY 59060-00 01
0
[A1005.0028] [SM] [Zoning edit session has been preempted by a zoning merge !]
Meaning: Zoning changes were being made when fabrics were merged - all
changes were lost.
Action: Close the Zoning edit session.
[A1005.002E] [SM] [Attempted Feature upgrade of features already installed]
Meaning: An attempt was made to repeat an upgrade that has already been
installed.
Action: None
[A1005.002F] [SM] [Attempted Licensed Port upgrade of ports that are already licensed]
Meaning: An attempt was made to repeat an upgrade that has already been
installed.
Action: None
[A1005.0030] [SM] [Upgrading Licensed Ports to <ports>]
Meaning: The switch is being upgraded to license the indicated total number
of ports.
Action: None
[A1005.0031] [Eport] [Invalid vendor data from media device for port <port>]
Meaning: Alarm if a frame to or from a WKA is rejected because of lack of
buffer to buffer credit
Action: None
[A1006.0004] [nserver] [NS: ACL overlap between <wwn> (x<port_id>) and <wwn>
(x<port_id>) (ACL <domain>,<port>)]
Meaning: The named zone members cannot communicate because they are
members of different ACL hard zones.
Action: Place both zone members in the same ACL hard zone or exclude
both from ACL hard zones.
[A2000.0002] [Pwr1 failure - ALARM SET]
Meaning: Power supply #1 has failed or has been removed.
Action: Contact customer support.
[A2000.0002] [Pwr2 failure - ALARM SET]
Meaning: Power supply #2 has failed or has been removed.
Action: Contact customer support.