User`s guide

3 – Alarm Messages
Alarm Messages
59060-00 01 PRELIMINARY 3-19
0
[A1005.0015] [SM] [Port <port> was DISABLED before NDCLA due to excessive errors -
still DISABLED]
Meaning: A port was automatically disabled due to excessive errors before
the nondisruptive code load and activation and remains disabled
afterwards.
Action: None
[A1005.0016] [SM] [Management Server cannot map RIELN (invalid SML symbols) to
Switch Symbolic Name]
Meaning: The management server registered an Interconnect Element
Logical Name (IELN) containing characters that cannot be mapped
to the switch symbolic name. The IELN and the switch symbolic
name do not match.
Action: Remove #, semicolon (;), and comma (,) characters from the IELN.
[A1005.0021] [SM] [Configuration is being restored - this could take several minutes !]
Meaning: Switch management is restoring the switch configuration.
Action: None
[A1005.0023] [SM] [Network setup is changing - may lose connection - admin being
released automatically]
Meaning: A System ActSetup command is being processed; a new network
configuration is activated.
Action: None
[A1005.0024] [SM] [Switch should be reset after leaving the Diagnostics AdminState]
Meaning: After changing the switch administrative state from Diagnostics to
any other state, the switch must be reset to complete the state
change.
Action: Reset the switch.
[A1005.0025] [SM] [Admin mode for user <user> was canceled by user <user>]
Meaning: The current Admin session was cancelled by another user.
Action: None
[A1005.0027] [SM] [Zoning database of over 3000 zone members may damage certain
non-QLogic switches !]
Meaning: More than 3000 zone members in the zoning database could
cause problems with other vendors’ switches.
Action: None