User`s guide

3 – Alarm Messages
Alarm Messages
59060-00 01 PRELIMINARY 3-17
0
[A1005.0000] [SM] [Illegal ZoneSet name <name> read from zoning merge]
Meaning: An illegal zone set name was encountered during a zoning merge.
Action: Rename the zone set. A zone set name can be up to 64
characters. Valid characters are 0-9, A-Z, a-z, _, $, ^, and -.
[A1005.0000] [SM] [Illegal ZoneSet name <zoneset> read from DS]
Meaning: The zone set name is illegal and the zone set will not be added to
the zoning database.
Action: Rename the zone set. A zone set name can be up to 64
characters. Valid characters are 0-9, A-Z, a-z, _, $, ^, and -.
[A1005.0000] [SM] [Switch Management reports problem with dequeueReq()]
Meaning: Switch management has experienced a problem; there could be a
resource problem on the switch.
Action: Reset the switch.
[A1005.0000] [SM] [Switch Management reports problem with dequeueReq()]
Meaning: Switch management has experienced a problem; there could be a
resource problem on the switch.
Action: Reset the switch.
[A1005.0004] [FC2] [Error reading configuration]
Meaning: Alarm if a frame to or from a Well Known Address is rejected
because of lack of buffer to buffer credit.
Action: Check credit configuration, possibly reconfigure.
[A1005.0006] [SM] [Request from <wwn> on port 0x<source id>>, failed authentication,
sending reject]
Meaning: Management server authentication is enabled, and the received
frame failed authentication.
Action: None
[A1005.000A] [nserver] [Warning: ignoring zone member %d,%d, can't map port to area for
node WWN %s]
Meaning: Couldn't map port to area, failed.
Action:
[A1005.000B] [nserver] [Port to area mapping for one member %d,%d now valid]
Meaning: Successfully mapped port to area.
Action: