User`s guide

3 – Alarm Messages
Alarm Messages
59060-00 01 PRELIMINARY 3-15
0
[A1004.002D] [Eport] [Noninterop Legacy switch setting makes domain/port zoning
non-interoperable]
Meaning: Zone members involving non-QLogic switches cannot be defined
by domain ID and port number when FC-SW-2 Compliance is
disabled and Legacy Address Formatting is enabled.
Action: Disable (False) the Legacy Address Formatting, enable FC-SW-2
compliance, or reassign the zone members using a method other
than domain ID and port number.
[A1004.0030] [Eport] [Topology change, lost route to switch with domain <domain>]
Meaning: Connection was lost to a switch in the fabric.
Action: Inspect switch connections and device hardware for proper
operation. Review accompanying alarms for other causes.
[A1005.0000] [SM] [Automatically changing zoning merge mode configuration to NonSW2]
Meaning: FC-SW-2 compliance is being disabled.
Action: None
[A1005.0000] [SM] [Cannot activate a configuration - CMON not responding]
Meaning: The CMON application is not responding indicating a resource
problem on the switch.
Action: Reset the switch.
A1005.0000] [SM] [Illegal Active Zone name <name> read from zoning app]
Meaning: The zone name is illegal and the zone will not be added to the
zoning database.
Action: Rename the zone. A zone name can be up to 64 characters. Valid
characters are 0-9, A-Z, a-z, _, $, ^, and -.
A1005.0000] [SM] [Illegal Alias name <alias name> read from DS]
Meaning: The alias name is illegal and the alias will not be added to the
zoning database.
Action: Rename the alias. An alias name can be up to 64 characters. Valid
characters are 0-9, A-Z, a-z, _, $, ^, and -.
[A1005.0000] [SM] [Illegal Alias name <alias name> read from
ZONING_ALIAS_MEMBER_READ]
Meaning: The alias name is illegal and the alias will not be added to the
zoning database.
Action: Rename the alias. An alias name can be up to 64 characters. Valid
characters are 0-9, A-Z, a-z, _, $, ^, and -.